▷Specifications
▷Apperance

PRESS MIXER, the monaural mixer thought-out for broadcast

Double limiter of Input-output

It has Hyper limiter for each channel on the input side, and suppress over level instantly.
Besides, it has Master limitter which is 3 levels changeable on the master output side.
It firmly supports professional sound recording to prevent sound distortion under any recording circumstances by switching limit level to 3 stages.

 
 
 
 

The meter for confirming recording level accurately can be confirmed by switching Output A/B.
You can switch PEAK meter which is suitable for digital recording or VU meter which confirms average level of the whole sound source.

 

Emphasize the operability and the visibility

You can confirm which channel being outputted, A or B, at a glance by arranging output select switch independently for each channel.
Besides, it has indicator displaying overload, and then it enables quick and accurate adjustment as well as LED of master volume.

 

Wide input range

Dynamic microphone, Phantom power supply microphone P48/AB12, LINE input

 

Output setting for all recorders

Balanced output (Canon 3pin) can be switched 4 levels of +4/0/-20/-60dB. RCA and mini jack supports consumer recorder by being fixed -10dBV.

 

Trans on the input side and the output side

It will be possible to remove in-phase noise induced to the cable and keep original quarity of signal by mounting trans on the input side and the output side.

 

Specifications

■Input/Output
【HD-SDI IN】

  • HD-SDI IN: 1 to 5, BNC x5: 1Vp-p, 75Ω
  • TITLE IN: 1, BNC x1: 1Vp-p, 75Ω(appropreated for HD-SDI IN)

【HD-SDI OUT】

  • HD-SDI OUT: 1 to 5, BNC x5: 1Vp-p, 75Ω, HD-SDI IN 1 to 5 through out
  • TITLE OUT: 1, BNC x1: 1Vp-p, 75Ω, TITLE IN through out

【PROGRAM OUT】

  • HD-SDI OUT: 1(4 distribution), BNC x4: 1Vp-p, 75Ω

【PREVIEW OUT】

  • HD-SDI OUT: 1, BNC x1: 1Vp-p, 75Ω

【Reference signal IN】

  • RF IN: 1, BNC x1: 1Vp-p, 75Ω, external reference signal input

【Reference signal OUT】

  • SYNC OUT: 1 (4 distribution), BNC x4: 1Vp-p, 75Ω, SYNC. generator built-in

【Frame Synchronization】

  • FS ON/OFF, Frame synchronizer built-in, on/off selectable

【REMOTE IN/OUT】

  • RM IN/OUT: 1/1, Mini 8-pin (female) x1/ x1

【Tally OUT】

  • TALLY: 1, D-sub 15-pin mini (female) x1

【DC IN】

  • 12V DC IN: 1, XLR 4-pin (male)

■MIX/WIPE
【Cut and Mix transitions】

  • Direct Cut, Mix(Overlap), and Wipe

【Wipe patterns】

  • 11 patterns : Border ON/OFF, Color, Width, and Soft(Blur) are selectable.

【Transition time】

  • 0 to 200 frames

■General
【Power requirement】

  • 12 V DC (11 V – 18 V) approx. 12W(1 A)

【Dimensions (WxHxD)】

  • 210 x 60 x 154 mm (excluding protrusions)

【Weight】

  • approx. 1.4 kg (without options)

【Operating Conditions】

  • Temperature: 0 ℃ to 40 ℃ ( 20 ℃ to 30 ℃ recommended)
  • Humiditty: 10 % to 85 % ( no condensation)

【Storage Conditions】

  • Temperature: -10 ℃ to 40 ℃
  • Humiditty: 0 % to 90 %

【Standard accessories】

  • AC power cable, Operating Instructions

Appearance

■Operation side


■Connector side